Solution Properties

Type of device to add in AutoAdd Mode: {dssGen (Default) | dssCap}

Base Solution algorithm: {dssNormalSolve | dssNewtonSolve}

Capacitor kvar for adding capacitors in AutoAdd mode

Flag indicating the control actions are done.

Value of the control iteration counter

{dssStatic* | dssEvent | dssTime} Modes for control devices

Flag to indicate whether the circuit solution converged

Hour as a double, including fractional part

Default daily load shape (defaults to "Default")

Default Yearly load shape (defaults to "Default")

Array of strings containing the Event Log

Set the Frequency for next solution

Generator kW for AutoAdd mode

Default Multiplier applied to generators (like LoadMult)

PF for generators in AutoAdd mode

Set Hour for time series solutions.

Get/Set the Solution.IntervalHrs variable used for devices that integrate / custom solution algorithms

Number of iterations taken for last solution. (Same as TotalIterations)

Load-Duration Curve name for LD modes

Load Model: {dssPowerFlow (default) | dssAdmittance}

Default load multiplier applied to all non-fixed loads

Maximum allowable control iterations

Max allowable iterations.

Minimum number of iterations required for a power flow solution.

Set present solution mode (by a text code - see DSS Help)

ID (text) of the present solution mode

Max number of iterations required to converge at any control iteration of the most recent solution.

Number of solutions to perform for Monte Carlo and time series simulations

Percent default annual load growth rate

Gets the time required to perform the latest solution (Read only)

Randomization mode for random variables "Gaussian" or "Uniform"

Seconds from top of the hour.

Time step size in sec

(write-only) Set Stepsize in Hr

(write-only) Set Stepsize in minutes

Flag that indicates if elements of the System Y have been changed by recent activity.

Get the solution process time + sample time for time step

Solution convergence tolerance.

Gets/sets the accumulated time of the simulation

Total iterations including control iterations for most recent solution.

Set year for planning studies