Sensor

( Circuit Element, Meter Element )

#	Name	Type	Default	Units	Description
1	Element	string (CktElement name)			Name (Full Object name) of element to which the Sensor is connected.
2	Terminal	integer	1		Number of the terminal of the circuit element to which the Sensor is connected. 1 or 2, typically.
3	kVBase	real	12.47	kV	Voltage base for the sensor, in kV. If connected to a 2- or 3-phase terminal, specify L-L voltage. For 1-phase devices specify L-N or actual 1-phase voltage.
4	Clear	boolean (action)	False		Clear=Yes clears sensor values. Should be issued before putting in a new set of measurements.
5	kVs	array of reals			Array of Voltages (kV) measured by the voltage sensor. For Delta-connected sensors, Line-Line voltages are expected. For Wye, Line-Neutral are expected.
6	Currents	array of reals			Array of Currents (amps) measured by the current sensor. Specify this or power quantities; not both.
7	kWs	array of reals			Array of Active power (kW) measurements at the sensor. Is converted into Currents along with q=[…] Will override any currents=[…] specification.
8	kvars	array of reals			Array of Reactive power (kvar) measurements at the sensor. Is converted into Currents along with p=[…]
9	Conn	string (from enum. Connection)	Wye		Voltage sensor connection. Applies to voltage measurement only. Currents are always assumed to be line currents. If wye or LN, voltage is assumed measured line-neutral; otherwise, line-line.
10	DeltaDirection	integer	1		Default is 1: 1-2, 2-3, 3-1. For reverse rotation, enter -1.
11	%Error	real			Assumed percent error in the measurement.
12	Weight	real	1.0		Weighting factor.
13	BaseFreq	real		Hz	Base Frequency for ratings.
14	Enabled	boolean	True		Indicates whether this element is enabled.
15	Like	string (Sensor name) deprecated			Make like another object, e.g.: New Capacitor.C2 like=c1 …