	Name	Description
	AllNames	Array of strings with all Load names in the circuit.
	AllocationFactor	Factor for allocating loads by connected xfkva
	Cfactor	Factor relates average to peak kw. Used for allocation with kwh and kwhdays
	Class
	Count	Number of Load objects in active circuit.
	CVRcurve	Name of a loadshape with both Mult and Qmult, for CVR factors as a function of time.
	CVRvars	Percent reduction in Q for percent reduction in V. Must be used with dssLoadModelCVR.
	CVRwatts	Percent reduction in P for percent reduction in V. Must be used with dssLoadModelCVR.
	daily	Name of the loadshape for a daily load profile.
	duty	Name of the loadshape for a duty cycle simulation.
	First	Sets the first Load active. Returns 0 if no more.
	Growth	Name of the growthshape curve for yearly load growth factors.
	idx	Get/set active Load by index; index is 1-based: 1..count
	IsDelta	Delta loads are connected line-to-line.
	kV	Set kV rating for active Load. For 2 or more phases set Line-Line kV. Else actual kV across terminals.
	kva	Base load kva. Also defined kw and kvar or pf input, or load allocation by kwh or xfkva.
	kvar	Get/set kvar for active Load. If set, updates PF based on present kW.
	kW	Set kW for active Load. Updates kvar based on present PF.
	kwh	kwh billed for this period. Can be used with Cfactor for load allocation.
	kwhdays	Length of kwh billing period for average demand calculation. Default 30.
	Model	The Load Model defines variation of P and Q with voltage.
	Name	Sets the active Load by Name.
	Next	Sets the next Load active. Returns 0 if no more.
	NumCust	Number of customers in this load, defaults to one.
	PctMean	Average percent of nominal load in Monte Carlo studies; only if no loadshape defined for this load.
	pctSeriesRL	Percent of Load that is modeled as series R-L for harmonics studies
	PctStdDev	Percent standard deviation for Monte Carlo load studies; if there is no loadshape assigned to this load.
	PF	Get or set Power Factor for Active Load. Specify leading PF as negative. Updates kvar based on present value of kW
	Phases	Number of phases
	RelWeight	Relative Weighting factor for the active LOAD
	Rneut	Neutral resistance for wye-connected loads.
	Sensor	Name of the sensor monitoring this load.
	Spectrum	Name of harmonic current spectrrum shape.
	Status	Response to load multipliers: Fixed (growth only), Exempt (no LD curve), Variable (all).
	Vmaxpu	Maximum per-unit voltage to use the load model. Above this, constant Z applies.
	Vminemerg	Minimum voltage for unserved energy (UE) evaluation.
	Vminnorm	Minimum voltage for energy exceeding normal (EEN) evaluations.
	Vminpu	Minimum voltage to apply the load model. Below this, constant Z is used.
	xfkVA	Rated service transformer kVA for load allocation, using AllocationFactor. Affects kW, kvar, and pf.
	Xneut	Neutral reactance for wye-connected loads.
	Yearly	Name of yearly duration loadshape
	ZIPV	Array of 7 doubles with values for ZIPV property of the load object

	Name	Description
	CheckForError	(Inherited from ContextState.)
	Equals	(Inherited from Object.)
	Finalize	(Inherited from Object.)
	GetContextHandle	Returns the low-level handle of the current OpenDSS/DSS-CAPI instance. (Inherited from ContextState.)
	GetHashCode	(Inherited from Object.)
	GetType	(Inherited from Object.)
	MemberwiseClone	(Inherited from Object.)
	ToString	(Inherited from Object.)

	Name	Description
	apiutil	(Inherited from ContextState.)
	ctx	(Inherited from ContextState.)

Loads Class

Reference